“SANDEEP” make steel body geared power operated shearing machine are designed and developed for accurate and paralleled sheet cutting. The machine is applicable to M. S., S. S., copper, Brass, Aluminum, CRS, CRGO, PVC, CRNGO, PCB and etc. cutting industries. It is also applicable to manufacturing of Electrical stamping, Automobiles, Tin, Drum, Barrel, control Panels and Board, Tube light patties, Fabricators and etc.

SIDE FRAMES : are of solid steel plates designed for maximum rigidity to eliminate deflection and to withstand continues high speed performance at full capacity.

RAM (UPPER BEAM) : is of solid steel plates and additional ribs on back side the ram adds to its strength, carrying the upper knife its maximum weight ensure lesser load on the bearing.The ram moves in accurate machined guide-ways to avoid deflection, for smooth running and maintains the proper strength ness of the upper knife.

TABLE : is of closed box type steel fabricated, which forms a rigid back bone for the shear and a solid backing for the lower knife. Additional ribs over the table adds to its strength.

BLADE : is four edged HC HCR provided for longer tool life.

CRANK SHAFT AND FLY WHEEL SHAFT : is of best steel, accurately machined and runs in gun metal bearing and all other journals are installed in gun metal bearings.

HOLD DOWN : is of steel fabricated spring loaded ensures uniform pressure throughout the cutting length without any slipping irrespective of the sheet.

ROLLING KEY CLUTCH : made of Alloy steel for positive engagement and continuous operation having three key way single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine.

DRIVE : is through ‘V’ Belts on the fly wheel and other chain of hob cut gears for smooth running and longer life. BRAKE: constant spring loaded adjustable brake is provided.

GAUGES : Rigid and accurate gauges provides consistent width of sheet to be cut.

LUBRICATION : for sufficient lubrication oil cups and oil points are provided.

STANDARD EQUIP : Side, Back, Front gauges and Tableextention, Fly Wheel and Gear guards, Foot pedal, Moter mount and Motor pulley, Hold down device, Set of 4 edge HC HCR blade.

EXTRA EQUIP : Motor, V Belts, Starter, Stroke counter and Scales, Lubrication hand pump manual or automatic.